we are open 7:00am to 7:00pm. Give us a call!

Serving Central New York Since 2005

Blog
Serving Central New York Since 2005
get a free quote
get a free quote

Common Problems for Different Roofing Materials

Different types of roof tiles

When it comes to choosing the right roofing material for your home, you will definitely want to consider the different ones that are available. You will also want to think about your local weather conditions and which types of problems are most likely to occur because of them. By knowing what to prepare for and watch for, it becomes easier to keep your roof in good condition for years to come.

Asphalt Shingles

The beating that asphalt shingles experience during harsh weather events can be so severe that it causes them to loosen or even completely fall off the roof. If you notice one or more having cracks, curling, or totally missing, you need to call a roofer as soon as possible. The longer you leave these types of problems unaddressed, the greater the risk of water intrusion to the roof deck and underlying materials.

Standing-Seam Metal Roofing

When you have a standing-seam metal roof installed, the panels will have raised seams where they connect together. Those seams have to stay tight and in good condition to keep water from seeping underneath the panels. Over time, however, stress on the panels from temperature changes and strong winds can make them become loose or damaged. Scratches to the protective finish on the metal panels can also result in rust, corrosion, and premature deterioration problems.

Corrugated Metal Roofing

For corrugated metal roofing, the most common problems tend to stem from loose fasteners and damaged seals around the fasteners. Even just one loose fastener can allow water to seep underneath the roofing panels. You also have to worry about falling branches leaving behind dents in the metal. If the underlying protective coating becomes damaged because of moisture intrusion or some other type of wear, you may start to see corrosion and rust.

EPDM Rubber Roofing

If you have a flat or low-slope roof, EPDM rubber roofing is a common material that roofers might suggest. This type does a great job at making sure water can drain properly so the roof doesn’t experience standing water after heavy rainfall. However, the rubber membrane that forms the roofing surface may develop punctures or tears because of falling branches, hail, or other impacts. When this happens, it makes water intrusion a major concern, and the seams may even start to separate, further aggravating the problem.

Unfortunately, there is no roofing material that is completely problem-free. This is why it’s so important to have a licensed roofer who offers same-day emergency service. When something goes wrong, you can have an expert onsite within hours to identify and fix the problem before it turns into extensive water damage or a much more expensive repair. When you need roof inspection services in Syracuse, NY, contact Forte Roofing.

get a free
quote today!